Share this page : facebooktwitterlinkedinmailfacebooktwitterlinkedinmail
Setup CME

Extract it:

archive tar /xtract tftp://x.x.x.x/cme-full-4.1.0.2.tar disk0:

Enable the http:

R1(config)#ip http server

R1(config)#ip http path disk0:/cme-full-4.1.0.2/gui

R1(config)#telephony-service

R1(config-telephony)#web admin system name gawad password cisco

R1(config-telephony)#dn-webedit

R1(config-telephony)#time-webedit

R1(config-telephony)# moh disk0:/cme-full-4.1.0.2/music-on-hold.au

 

Access it

 

http://ip_address/ccme.html

 

Problem:

1.  disk0 is formatted from a different router

you may get a disk not flash, before the first use.

use command:

format disk0:

 

Reference

 

http://ftp.radio-portal.ru/index.php?folder=Cisco%2FCisco%20CallManager%20Express